Programming with multiple ST-Link programmers
When using multiple ST-link programmers on Linux, the default OpenOCD scripts are not sufficient to select different programmer adapters
Articles in the posts category
The Raspberry Pi, a temperature sensor and the device tree.
The LM75 is a temperature sensor with an i2c interface. It can be easily attached to a Raspberry Pi. But with the correct device tree snippet, the Linux kernel will pick up the sensors automatically and use the correct kernel module for it. This results in that applications such as lm-sensors can also pick up the temperature sensor.6LoWPAN on Linux with Raspberry Pis
A guide to getting 6LoWPAN working on a Raspberry Pi with mrf24j40 modulesFirst post
Short post about being the first post
Page 1 / 1