https://bergzand.net/Thu, 15 Dec 2016 16:19:00 +0100https://bergzand.net/programming-with-multiple-st-link-programmers.htmlWhen using multiple ST-link programmers on Linux, the default OpenOCD scripts are not sufficient to select different programmer adaptersKoen ZandbergThu, 15 Dec 2016 16:19:00 +0100tag:bergzand.net,2016-12-15:/programming-with-multiple-st-link-programmers.htmllinuxRIOT-osST-LinkjtagOpenOCDhttps://bergzand.net/the-raspberry-pi-a-temperature-sensor-and-the-device-tree.htmlThe LM75 is a temperature sensor with an i2c interface. It can be easily attached to a Raspberry Pi. But with the correct device tree snippet, the Linux kernel will pick up the sensors automatically and use the correct kernel module for it. This results in that applications such as lm-sensors can also pick up the temperature sensor.Koen ZandbergTue, 12 Jan 2016 00:00:00 +0100tag:bergzand.net,2016-01-12:/the-raspberry-pi-a-temperature-sensor-and-the-device-tree.htmlRaspberry PilinuxraspbianDevice treeLM75https://bergzand.net/6lowpan-on-linux-with-raspberry-pis.htmlA guide to getting 6LoWPAN working on a Raspberry Pi with mrf24j40 modulesKoen ZandbergTue, 05 Jan 2016 00:00:00 +0100tag:bergzand.net,2016-01-05:/6lowpan-on-linux-with-raspberry-pis.htmlRaspberry Pi6LoWPANIEEE 802.15.4linuxraspbianhttps://bergzand.net/first-post.html<p>Short post about being the first post</p>Koen ZandbergSat, 18 Apr 2015 10:20:00 +0200tag:bergzand.net,2015-04-18:/first-post.htmlfirstposts